CWE Builds

AdamJohnso · **Posted:** Sat May 18, 2013 12:26 am

After a long delay, it is time to resume posting public H-uru CWE Builds

The older builds have been removed due to licensing issues with RAD Game Tools, hence the new thread.

As before, these builds include an internal client, which can allow you to do not-so-nice things, if you have the know how. Please confine your MOULa experiments to The Fun House. We take no responsibility for your breaking anything. If you're really serious about playing with the internal client, there is enough stuff in these builds to facilitate the running of your own shard.

Prerequisites

H'uru CWE 1.918 (June 13, 2013)

AdamJohnso · **Posted:** Sat May 18, 2013 12:26 am

Common Questions
To make things easier for everone involved, I will edit this post with answers to questions that I find myself answering a lot or anticipate.

"How do I use this on MOULa?"
Copy your MOULa dat and sfx directory into the CWE Client directory. Then, create a shortcut to plClient.exe with the arguments /ServerIni=server_moula.ini /SkipPreload. Do not use UruExplorer.exe, UruLauncher.exe, or plUruLauncher.exe to connect to MOULa -- this will just cause your CWE client to be overwritten with the standard MOULa client.

"What does the new error dialog mean?" / "What is UruCrashHandler?" / "Why are there no stack dumps?"
Error handling has been restructured in the H-uru codebase. When URU starts, UruCrashHandler starts and attaches itself to the game and watches for serious errors. If an error that would cause a stack dump occurs, UruCrashHandler will save a file called crash.dmp in your log folder. The game will then inform you to submit your logs to the developer. If you are savvy, you can open this file with Visual Studio and find the problem yourself. If not, feel free to send crash.dmp or the entire log folder to us, and we will be happy to figure out what went wrong. A description of what you were doing or expected to happen at the time of the crash may be helpful.

"Why isn't there a Max 2013 Plugin available?"
The 3ds Max SDK changed enough in 3ds Max 2013 that no one has wanted to take the time to make the plugin compatible. Perhaps this will be done at some point in the future.

"Why isn't there a (insert 3ds Max version here) plugin available?"
Because I didn't have that SDK installed or didn't want to spend time compiling the engine yet another time (each build takes approximately 20 minutes). I can try to make more plugin versions available if asked, though turnaround time may not necessarily be fast.

Jamie Marchant · **Posted:** Sat May 18, 2013 12:46 am

Thank you Adam

I assume this is a H-URU build?

AdamJohnso · **Posted:** Fri Jun 14, 2013 3:51 am

H'uru CWE 1.918 builds have been released! Please see the OP for download links.

Notable changes (since 912a):

plModifier no longer depends on PhysX (compiles on *nix)
Fixed python package logic to not produce an erroneous ki.pak file
PhysX structure validation change from run-time to compile-time
The spinning book is now displayed throughout the linking process
Bump buildID to 918
plProfile now displays hundreths of a millisecond (vs a tenth) to enable better skinning profiling
Fix improper hood membership caption and truncated age invitation display

Please keep in mind that builds previous to 912a are plagued with licensing issues. The source code is no longer available; therefore, it is a violation of the GNU General Public License to distribute them. Thanks for your cooperation.

Calumon · **Joined:** Wed Aug 22, 2007 9:38 pm **Posts:** 1669

Thanks Adam! I'm sure a lot of people are going to be happy about this! ^U^

Ehren · **Posted:** Fri Jun 14, 2013 6:47 am

This is more complicated than the 1.912 version. (didn't use 1.912a)

AdamJohnso wrote:

Then, create a shortcut to plClient.exe with the arguments /ServerIni=server_moula.ini /SkipPreload.

I don't know what this means...

Annabelle · **Posted:** Fri Jun 14, 2013 7:08 am

Thanks Adam. I'll check this out tomorrow

Ehren · **Posted:** Fri Jun 14, 2013 7:34 am

lunanne wrote:

Right click on the "plClient.exe" and create a shortcut.

Right click the shortcut, choose "properties" and add the arguments at the end of the target field.

Thank You!

Does anyone know where to get the .py files?

AdamJohnso · **Posted:** Fri Jun 14, 2013 7:46 am

They're included in the Python.pak file that should be/is bundled with the client. The source for those files can be found at https://github.com/H-uru/moul-scripts/c ... b2fdbb37ef

dj_ · **Joined:** Sun Jan 02, 2011 5:28 pm **Posts:** 146

If I want to just update my old plclient, what might I do?

Jamie Marchant · **Posted:** Sat Jun 15, 2013 9:55 pm

Firstly thank you Adam for compiling that and for contributing too it!

This client is not actually meant to be run on Cyan MOULa, it's just a release of the client. For that reason, it has no auto-update feature.

Lyrositor · **Joined:** Sun Aug 08, 2010 2:14 pm **Posts:** 808

dj_ wrote:

If I want to just update my old plclient, what might I do?

Download the new version and remove the old one.

Jamie Marchant wrote:

This client is not actually meant to be run on Cyan MOULa, it's just a release of the client.

It is. That's what the server_moula.ini file is for.

Jamie Marchant · **Posted:** Sat Jun 15, 2013 10:33 pm

Sorry I thought it was designed for a different perpuse originally, but I don't know where that thread went so I could not look it up.

GorenDeBree · **Posted:** Sun Jun 16, 2013 1:20 am

Thanks to all,

This is great...new build in game

The CWE update is great

Wow, you guys are the best.....YAY!!

Thanks all :lol:

CWE Builds

Who is online